FREE delivery on all UK orders!

Set Ascending Direction

5 Item(s)

New Discount Available!

Monday, 23 April 2018 16:58:50 Europe/London

We're pleased to announce that you can now get toys from us for even less! Starting today we're offering a 5% discount on all UK orders over £20 when you buy 2 or more items. Simply add 2 or more items to your basket and if your delivery address is in the UK you will qualify for our 5% combined shipping discount.



Comments | Posted By Action Figure Supplies

Star Wars Black Series Update

Saturday, 14 October 2017 16:59:40 Europe/London

Late last night we received an email from one of our suppliers about stock levels for Star Wars The Black Series 6 inch waves and it's not good news for those of you trying to get Darth Revan or Sabine Wren. Wave 9 which contained Darth Revan, Sabine, AT-AT Driver, Princess Leia, Obi-Wan Kenobi and the Snowtrooper is officially sold out at Hasbro. Whilst there are still plenty of solid cases of Kenobi and Leia around and the AT-AT Driver and Snowtrooper were repacked in Wave 13 there's no sign of Revan or Wren being repacked in the near future and solid cases of these figures were never produced.

The other news from the email was that Wave 12, the Force Friday II wave featuring Old Luke, Rey Jedi Training, Thrawn, Vader, Stormtrooper, Hera Syndulla and Kylo Ren is also sold out at Hasbro! Solid cases of Luke, Hera and Thrawn are also sold out or cancelled! Luke, Rey and Kylo are all repacked in the upcoming wave 14. Solid cases of Vader are still available but the Stormtrooper was never available. Surely such an evergreen figure and army builder should be permanently available?! Fortunately there are still cases of wave 12 in stock at some wholesalers and plenty of Thrawns and Heras available. However based on past performance of non saga figures I would not expect these figures to be repacked in any later waves.

The good news is our solid cases of the Black Series Imperial Royal Guard are finally on their way. Order yours now to avoid disappointment as these are also sold out by Hasbro.

I would also recommend pre-order Jaina Solo if you are at all interested in this figure as it might not be around for long!

Comments | Posted By Action Figure Supplies

Pre-orders arriving soon

Friday, 24 March 2017 17:16:21 Europe/London

One of the reasons we added this blog to the site was to help inform you about our new arrivals.  Well we're happy to update you with the following items arriving in the first week of April:

Star Wars Black Series

Acid Rain

If you've pre-ordered any of the above items look out for an email from us at the end of the month with details on how to pay the balance of your order.

In other news the release of the Star Wars Black Series wave featuring the Emperor's Royal Guard, Lando Calrissian, Hera, etc. has been delayed. We do not currently have a confirmed release date for these figures but all pre-orders will be honoured. We have heard that Hasbro have asked several retailers to delay pre-orders on several lines until April.


Comments | Posted By Action Figure Supplies

New & Improved 3D Printed Parts

Wednesday, 12 October 2016 20:18:50 Europe/London

Our latest batch of 3D printed parts have arrived from the printers. This time around we've got the GI Joe / Action Force Rapid Fire Motorcycle / RAM Cycle kickstand, more Battle Tank guns and some test runs of some new or improved models and some fifferent materials.

First up is the Shadowtrak missile, this time in black acrylic (left) rather than the standard sintered plastic (right). As you an see the acrylic plastic has a kind of waxy coating that needs to be cleaned off.

Repro Shadowtrak Missile in Acrylic Plastic 

Next up is an improved version of the mines for Tripwire or the Z Force Minesweeper. The first attempt at modelling them wasn't quite right, there was not enough detail in the finished print. After a few tweaks we sent this to be printed again. I'm much happier with these and will see what they look like painted up and varnished.

 Repro Mines

Next up is the SAS Panther steering wheel. Last time we printed it waaaaaaaay too big so this is a test version at (hopefully) the correct scale.

 Repro SAS Panther steering wheel

The wheel turned out correct, maybe a millimeter too small. It looks good in place though:

Repro SAS Panther steering wheel

The next models are probably the very first 3D models I ever built and I've been tweaking and finessing the model for months trying to get it to print correctly and fit together nicely. This is the missile rack for the Z Force APC! The original features a split pin to hold the rack in place securely whereas I decided to build our version with a solid pin for ease and strength. It also makes removing the rack much easier with less chance of breaking the pin. The rack tilts and swivels like the original and has 4 holes for the missiles to slot in to.

Repro APC missile rack 

Next up is another Action Force part and this one is a brand new model. Here's the test print for the Q Force Swordfish missile arm, a piece that's often missing or broken (like the original piece in the photo below). I'll be painting and sealing this to get an accurate Q Force grey finish. Look out for this one to be added to the shop soon. Why not join our mailing list and be the first to know when new stock is added?

Repro Swordfish Part

Here's how the part looks painted up to (almost, grey paint was a little bit too dark) match the original part:

Repro Swordfish Part Painted 

Our final test print is for a part that's almost impossible to get hold of at a decent price: chin guns for a vintage Star Wars AT-AT! This model was printed in solid white plastic to check the model's printability and the fit on the AT-AT before we go in to production in transparent plastic.

Repro AT-AT gun

Repro AT-AT gun 

For those of you wondering about our largest ever print mentioned in the last blog post... it didn't turn out quite as we hoped. It wasn't a disaster but it wasn't a complete success and fixing the model is taking longer than anticipated. Hopefully we'll be able to reveal it in a future 3D printing post soon.

Comments | Posted By Action Figure Supplies

Reproduction Action Force Parts

Thursday, 23 June 2016 11:42:58 Europe/London

Some time ago I began investigating the possibility of releasing a range of reproduction Action Force parts. 3D printing seemed like the logical solution.

Read More
Comments | Posted By Action Figure Supplies
Set Ascending Direction

5 Item(s)

Save 10% When You Sign Up!
Would you like to be one of the first to receive exclusive information about our latest products and sales? Subscribe to our free newsletter now and get a voucher for 10% off your next order! We do not sell or share your details.